¶ Part1-1: Download the tools and firmware shown below
- HoloFlashTool
- Holo Firmware
- HoloCubic_AIO (option)
¶ Part1-2: Connect Holo to PC
As shown on the right, use a Type-C data cable to connect Holo and PC
¶ Part1-3: HoloFlashTool
Open HoloFlashTool and find Holo's serial port
¶ Part2: Start firmware update(Holo)
Select the path of the Holo-0.2 firmware, click Upload to start updating the firmware
When see the boxed content as shown on the right, it means that the firmware update is complete
¶ Part3-1: Update HoloCubic_AIO firmware
Holo hardware is also compatible with HoloCubic_AIO firmware,
If you need to use that series of firmware, you only need to download the HoloCubic_AIO firmware in Page3 first.
¶ Part3-2: Update HoloCubic_AIO firmware
Follow the steps shown on the right to update the firmware of HoloCubic_AIO
¶ Congratulations, all done
You have completed all the update, and now you can put the Holo anywhere you like.